S 320 SWB (140.032) L6-3.2L (104.994) (1994)
D. Rear Apron (Model 202)
Preparation
1.
Remove fasteners (arrows, Figure 12) and rear trim panel.
2.
Press side trim to side and remove mounting nut and washer.
3.
Remove bumper towards rear.
Disassembling the bumper
4.
Remove rub strip by unscrewing screws on left and right ends of bumper.
Using a plastic wedge, pry back retaining tabs two at a time starting from the outside. Remove rub strip and foam inserts.
5.
Remove holder and impact absorber sections.
6.
Remove chrome moldings.
Assembly