S 320 SWB (140.032) L6-3.2L (104.994) (1994)
Axial Mounting (refer to footnote [1])
Fit Bearing Width (refer to footnote [3]):
Standard Machining Stage (refer to footnote [2]): 24.500 - 24.533 mm
Colored ID (refer to footnote [5]): None
Laser Lettering On Front Of Crankshaft: O
Standard Machining Stage (refer to footnote [2]): 24.500 - 24.533 mm
Colored ID (refer to footnote [5]): None
Laser Lettering On Front Of Crankshaft: O
Standard Machining Stage (refer to footnote [2]): 24.500 - 24.533 mm
Colored ID (refer to footnote [5]): None
Laser Lettering On Front Of Crankshaft: O
Standard 1 Machining Stage (refer to footnote [2]): 24.600 - 24.633 mm
Colored ID (refer to footnote [5]): White
Laser Lettering On Front Of Crankshaft: 1
Standard 1 Machining Stage (refer to footnote [2]): 24.600 - 24.633 mm
Colored ID (refer to footnote [5]): Purple
Laser Lettering On Front Of Crankshaft: 1
Repair 1 Machining Stage (refer to footnote [2]): 24.700 - 24.733 mm
Colored ID (refer to footnote [5]): ---
Laser Lettering On Front Of Crankshaft: ---
Repair 2 Machining Stage (refer to footnote [2]): 24.900 - 24.933 mm
Colored ID (refer to footnote [5]): ---
Laser Lettering On Front Of Crankshaft: ---
Repair 3 Machining Stage (refer to footnote [2]): 25.000 - 25.033 mm
Colored ID (refer to footnote [5]): ---
Laser Lettering On Front Of Crankshaft: ---
Repair 4 Machining Stage (refer to footnote [2]): ---
Colored ID (refer to footnote [5]): ---
Laser Lettering On Front Of Crankshaft: ---
[1]:
New crankshafts are identified before shipping from the factory with the tolerance classification of the crankshaft bearing journal diameter and fit
bearing width either with a colored identification on the counter-weights or with laser lettering on the front of the crankshaft journal.
[2]:
Standard size 1 and repair size crankshafts are not supplied as replacement parts except in reconditioned engines.
[3]:
The thrust washers for axial bearing play are supplied in thickness of 2.15, 2.20, 2.25, 2.35 and 2.40 mm each with a thrust washer for the
crankcase and the thrust washer for the bearing cap a parts kit (2 in total).
[4]:
Located on counter weight.
[5]:
Located on counter weight 8 and 9.