S 320 SWB (140.032) L6-3.2L (104.994) (1994)
Removing
1. Position piston of cylinder 1 to ignition TDC.
2. Remove front cover at top, refer to Timing Components - Timing Cover - Service and Repair - Procedures See: Timing Cover/Service and
Repair
3. Mark timing chain relative to exhaust and inlet camshaft sprockets (arrows).
4. Unscrew bolt (3); counter-hold armature (4) at flat (arrow) for this step. Pull off armature (4).
5. Unscrew nut (6), take off cover with ring (12).