S 320 SWB (140.032) L6-3.2L (104.994) (1994)
Compressor Clutch: Service and Repair
Compressor Electromagnetic Clutch
REMOVAL:
1. Remove refrigerant compressor.
Pin Wrench, Special Tool # 000 589 00 05 00
Holding Spring Plate With Pin Wrench
2. Remove spring plate (61) using pin wrench (special tool # 000 589 00 05 00), to hold spring plate.
3. Remove snap ring (63) using outside snap ring pliers.
4. Drive off ribbed V-belt pulley (65) using a plastic mallet.
NOTE: If the same pulley is reinstalled, the friction surface of the pulley must be cleaned. If the friction surface displays signs of damage (e.g.
due to overheating), the pulley must be replaced together with the spring plate.
5. Remove snap ring (69).