S 320 SWB (140.032) L6-3.2L (104.994) (1994)
Camshaft Position Sensor: Adjustments
Shown on engine 111.92 for illustration purposes.
11/1
Sealing ring
11/2
Shim
L5/1
Camshaft position sensor
Arrow -> Coupling
-
Rotate crankshaft until the camshaft gear segment and the camshaft position sensor (L5/1) are positioned opposite each other.
Camshaft Position Sensor, Clearance Measurement
-
Measure gap between camshaft gear segment and camshaft position sensor (L5/1) with feeler gauge.
-
Specified value: 0.4 - 0.6 mm (average value 0.5 mm).
NOTE: Shims (11/2) are available as replacement parts in thicknesses from 0.1 - 1.0 mm in graduations of 1/10 mm.