S 350 (140.134) L6-3.5L DSL Turbo (603.971) (1995)
11
Screw belt end fitting onto driver's seat (35 Nm).
12
Install door edge protector.
13
Check function of belt height adjustment
Remove/Install Paneling on C-Pillar
Preliminary work.
Rear seats removed. See: Seats/Service and Repair
Screw (1)
screw out.
Rear compartment light (2)
remove.
Edge protector in area of panelling (3)
pull off.
Panelling (3)
unclip at front (3 arrows).
Clip (4)
unhook by pressing panelling (3) toward center.
Panelling (3)
remove toward front.
Belt end fitting on rear floor
screw off.
Belt fitting
guide through opening in panelling (3).