Brake Discs - Coating Removal During Thorough Test Drive
As an accessory to the model 8944 multi-speed combination brake lathe, MBNA recommends the use of the Non-Directional Brake Disc Finisher
(arrow, Figure 2). This finisher simultaneously provides nondirectional finish to both sides of the brake disc which will not affect accuracy. It mounts
permanently to the brake lathe.
Part Number:
MB 433179
Also available is a Dust Containment Unit (Figure 3). This helps to keep the work area clean and free of metal chips and dust particles. The dust
containment unit consists of a hinged-metal enclosure which mounts directly to the bench, shop vacuum and collection pail.
Part Number:
MB 436351
Dust Unit
MB 436365
Vacuum System