S 350 (140.134) L6-3.5L DSL Turbo (603.971) (1995)
Note
In the event that roll pins are seized and cannot be removed using the special tool, remove hub (see SMS, Job no. 33-0310). Once hub is removed,
drive roll pins out from the rear using an 8 mm drift. Reinstall hub, then adjust wheel bearing play to .01 mm (see SMS, Job no. 33-0300).
In Case of Warranty
Operation: Removal of roll pins from both front wheel hubs (with rotor removed).
Does not include:
Additional time for removing seized roll pins. Any additional time needed for removing seized roll pins should be submitted as actual (NON) time,
operation number 33000001, with appropriate text in claim text field.
Parts Information
Part Name
Part Number
Brake rotor for four piston caliper
140 421 10 12
Brake rotor for two piston caliper
140 421 03 12
Bolt
201 421 01 71
This tool was shipped automatically to all authorized Mercedes-Benz dealerships as part of the Model Year 1995 "A/B" package and should, therefore,
already be a part of your tool inventory.
Special Tools