S 420 (140.043) V8-4.2L (119.971) (1994)
Air Register: Service and Repair
Remove/Install Air Collector Unit and Water Collector
Removing and Installing Air Collector Unit and Water Collector
Lip-type seal (arrow)
Pull out.
Vacuum lines on main element air flap (44)
Pull off.
Slacken 6 screws (3)
Lift air collector unit (2), turn thermal valve for surface heating of wiper system (7) to the left, unclip and pull out temperature sensor (B10/5). (On
vehicles with automatic climate control)
Air intake
Cover using special tool (140 589 00 98 00).
Wiper system
Remove. See: Wiper and Washer Systems/Service and Repair
Rubber mount
Remove, special tool 140 589 00 07 00.
Water collector (4)
Remove (4 screws).