S 420 (140.043) V8-4.2L (119.981) (1996)
-
Moisten conrod nuts and thread and contact surface of conrod bolts with engine oil and tighten.
-
Tightening torque, refer to Tightening Connecting Rod Bolts. See: Connecting Rod/Service and Repair
CAUTION:
-
Pay attention to installation position of conrod bearings.
-
Install conrod bearing shell with oil drilling in the conrod otherwise lubrication of the piston pin is not assured.
13. Rotate crankshaft and check whether it rotates freely.