S 420 (140.043) V8-4.2L (119.981) (1996)
Fuse Block: Service and Repair
Front Fuse and Relay Box
Ground cable on battery
disconnect, connect.
Fuse box cover (1)
remove, install.
Connector
remove from mount, install.
Screws (3)
unscrew, screw in.
Relay box cover (4)
remove, install.
Screws (5)
unscrew, screw in.
Fuse holders (6)
remove from fuse and relay box (F1) and disconnect, install and reconnect (see note).
All relays and control modules (arrow)
remove, reinstall.
Electrical connections from relay carrier (7)
unclip, clip in.
Fastening nuts fur fuse and relay box
unscrew, screw in.
Fuse and relay box
remove, reinstall.
After connecting the battery perform the following work