S 420 (140.043) V8-4.2L (119.981) (1996)
9. Check condition of joint boot (7f) and and wire retaining springs (7d and 7h)
-
Repair or replace as required
INSTALLATION
-
Install in reverse order, noting the following:
-
Tighten the self-locking nut, supporting joint on steering knuckle to: 140 Nm
-
Tighten the self-locking nut, supporting joint on wishbone to: 100 Nm
-
Tighten the locking screw of front brake disc splash shield on steering knuckle: 22 Nm
-
Tighten the locking screw of the brake disc to: 10 Nm