S 420 (140.043) V8-4.2L (119.981) (1996)
Stabilizer Link: Service and Repair
Rear
Rear
NOTE: Numbers in parentheses ( ) indicate a component or tool in the associated illustration.
REMOVAL
-
Remove Nuts (78a and 78b), then stabilizer bar connecting rods (78)
INSTALLATION
-
Install in reverse sequence, noting the following
-
Replace self-locking bolts
-
Tighten the following components as noted:
-
Self-locking nut for fastening stabilizer bar connecting rod to stabilizer bar: 40 Nm
-
Self-locking nut for fastening stabilizer bar connecting rod to wheel carrier: 40 Nm