S 420 (140.043) V8-4.2L (119.981) (1996)
/v8-4.2l_(119.981)/Page-1518001.png)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
Removing and installing oil filler pipe
1
Unscrew bolts (61a - 61c)
2
Using a suitable tool, knock oil filter pipe (61) out of housing bore of the transmission housing
Installation: Put O-ring on the oil filler pipe
3.1 Engine 606.964: Disconnect exhaust-gas recirculation pipe (51) on exhaust manifold
3.2 Engines 112/113: Remove transverse exhaust pipe
Installation: The exhaust-gas recirculation pipe must only be disconnected in the event of complete removal. The oil filler pipe is only swung to
one side for work, such as, removing the transmission.
4
Install in reverse order
