S 430 (220.170) V8-4.3L (113.941) (2000)
Cellular Phone Transceiver: Service and Repair
Removing and installing transmitter/receiver unit
GSM cellular telephone (D2B)
Shown On Model 220
1
Connect quiescent current retention unit
-
See "Commercially Available Tools" below.
2
Disconnect ground cable of battery
3.1 Remove rear seat cushion
3.2 Remove bucket seats
-
Model 220 with code 401, right side only.
4
Remove seat adjustment mechanism on rear seat
-
Model 220 with code 401, right side only.
5
Fold back cover mats
6
Unscrew screws (1) and remove cradle (2)
7
Disconnect connector (3) and antenna connection (4) from telephone transmitter/receiver (A35)
8
Install in the reverse order
9
Perform function check.
Commercially Available Tools
Commercially Available Tools