S 430 (220.170) V8-4.3L (113.941) (2000)
COMAND System: Service and Repair
AR82.85-P-7472I Remove/Install Comand Operating, Display and Control Module
- with CODE (352a) COMAND operating and display system
1
Connect quiescent current retention unit
2
Disconnect ground lead from battery
3
Remove cover on center console
4
Unscrew screws (1) and pull out COMAND operating, display and control module (A40/3)
NOTE: Use screwdriver with magnetic tip for screws which are hard to reach
5
Disconnect electrical connectors
6
Install in opposite order.