S 430 (220.170) V8-4.3L (113.941) (2000)
The following settings are also possible:
-
Automatic door locking (On or Off)
-
Speed limiting for winter tires (210 km/h or Off)
-
Driving lights light circuit (manual, automatic, lights on permanently)
-
Headlamp connection (time)
-
Interior light shutoff delay (time)
-
Station search (frequency/memory)
More detailed information on these settings can be found in the function descriptions for the relevant systems.
Changing the settings:
-
Press system select pushbutton (S110s3) until the ((Settings...)) < f > function appears in the multifunction display (A1p13),
-
Press the scroll forward pushbutton or scroll back pushbutton until the display of the setting to be changed appears in the multifunction display
(A1p13),
-
Press pushbutton + and -, setting of specific functions and volume control (S111s1) in the (+) or (-) direction until the arrow in the display is on the
desired value.
-
The setting is valid immediately.
NOTE: Settings can only be made at vehicle speeds below 5 km/h. If the speed increases to over 10 km/h during the setting the display returns to the
((Settings)) basic display. The display only switches back to the previous display mask once the speed drops below 5 km/h again.
Example:
Changing over the temperature display from °Celsius to °Fahrenheit.
-
Press system select pushbutton (S110s3) until the ((Settings...)) function appears in the multifunction display (A1p13).
-
Press the scroll forward or scroll back push button until the ((TEMPERATURE DISPLAY)) readout appears in the multifunction display (A1p13).
-
Press pushbutton (-) on the right-hand side of the steering wheel, the arrow in the display now points to °F
-
The setting is valid immediately
Reproducing the plant settings
All the possible settings here are erased by a reset and the plant setting reproduced.
Carrying out reset: