S 430 (220.170) V8-4.3L (113.941) (2000)
6
Unscrew screw (4) from bracket for left (N32/1), right (N32/2) front seat adjustment control module with memory
7
Unscrew screws (6, 2 pcs.) from front/back motor (M27m1, M28m1), or rear front/back motor (M27m2, M28m2) or front up/down motor
(M27m3, M28m3) and remove respective motor
-
Internal torx set: See "Special Tools" below.
NOTE: Only replace faulty motor.
-
Bolt of seat adjustment motor: 4 Nm
8
Unscrew bracket (5) for left (N32/1), right (N32/2) front seat adjustment control module with memory and strut (7) from motor group
9
Install in the reverse order
10
Check seat adjustment for proper function.
Special tools
Torx Bit Set P/N # 000 589 01 10 00