S 430 (220.170) V8-4.3L (113.941) (2000)
Procedure:
A.
PRELIMINARY WORK
1.
Disconnect battery ground cable WIS: AR54.10-P-00031.
Caution!
Do not install quiescent current retention unit.
2.
Remove right front floor covering WIS: AR68.20-P-2070M.
Note:
Only remove as far as necessary until the foot support is accessible.
3.
Remove right front foot support.
4.
Lift up right front SAM (WIS: AR54.21-P-1261I) to gain access to harness opening in bulkhead.
Note:
^
Do not completely remove right front SAM.
^
If necessary, disconnect wire harness connectors from ME-SFI control module.