S 500 Coupe (140.070) V8-5.0L (119.970) (1995)
/v8-5.0l_(119.970)/Page-563001.png)
Connecting Rod: Specifications
Rod Bearing Cap Torque
NOTE:
-
Lubricate all bolt threads and bearing surfaces with engine oil before installation.
-
Do Not use flex beam type torque wrench for angle tightening phase.
NOTE: 1st version is only applicable to engine 119.960.
Second Version Bolt
New Bolts (First Tightening): 45 Nm
Retightened Bolts: 40 Nm
Tightening Angle: 90°
CAUTION: It is essential to observe these instructions otherwise conrod bolts may slacken.
Third Version Bolt
New Bolts (First Tightening): 40 Nm
Retightened Bolts: 30 Nm
Tightening Angle: 90°
CAUTION: It is essential to observe these instructions otherwise conrod bolts may slacken.
