S 500 Coupe (140.070) V8-5.0L (119.970) (1995)
-
Moisten conrod nuts and thread and contact surface of conrod bolts with engine oil and tighten.
-
Tightening torque, refer to Tightening Connecting Rod Bolts. See: Connecting Rod/Service and Repair
CAUTION:
-
Pay attention to installation position of conrod bearings.
-
Install conrod bearing shell with oil drilling in the conrod otherwise lubrication of the piston pin is not assured.
13. Rotate crankshaft and check whether it rotates freely.