S 500 Coupe (140.070) V8-5.0L (119.970) (1995)
-
Remove nuts (19b/20b) and eccentric screws (19/20)
-
Remove lower wishbone (4).
-
Unscrew supporting joint nut (7a) on wishbone side.
-
Screw thrust piece onto the ball pivot of the supporting joint.
-
Using puller, press supporting joint out of wishbone.
-
Check supporting joint.
-
Install in reverse order.
-
Perform chassis aliment check.
Torque specifications
Shock absorber to wishbone ................................................................................................................................................................................... 100 Nm
Supporting joint on steering knuckle ..................................................................................................................................................................... 140 Nm
Supporting joint on wishbone ............................................................................................................................................................................... 100 Nm
Lower wishbone on front axle carrier ................................................................................................................................................................... 180 Nm
Locking screw on front brake disc .......................................................................................................................................................................... 10 Nm