S 500 Coupe (140.070) V8-5.0L (119.980) (1997)
b. Install puller/installer tool No. 124 589 05 43 00 or 140 589 08 43 00, or equivalents with attachments (08a, 08b, 08c and 08e) through
bearing as shown in the illustration
c. Pull bearing (8) from wheel carrier
INSTALLATION
1. Assemble puller/installer tool with new bearing into wheel carrier as shown in the illustration
2. Pull two row angular ball bearing fully into wheel carrier
3. Insert locking snap ring into groove to retain bearing
4. Assemble puller/installer tool with axle shaft flange as shown in the illustration
5. Pull axle shaft flange into bearing
6. Install rear axle shaft, tighten twelve point collared nut to: 320 Nm
-
Secure with Loctite 574, or equivalent, sealing compound
7. Install brake components
8. Install wheel