mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

C/D Changer - Installation|Page 8201 > < Audio Control Relay|Locations
Page 1
background image

Technical Service Bulletin # 82_085

Date: 951001

C/D Changer - Installation

REF. NO. MBNA 82/85

TO: OUR MERCEDES-BENZ PASSENGER CAR DEALERS

DATE: October 1995

SUBJECT: 
MODELS 129, 140, 202 and 210 MODEL YEAR 1996 INSTALLATION OF CD CHANGER

The Work Instructions (W.I. nos. 341, 342, 343 and 344) describe the installation of the next line Mercedes-Benz CD changer (pant no. 002 820 59 89 -
[new] or 002 820 59 89 90 [exchange]) in vehicles equipped with a one-piece radio (models 1492/CM2194/CM2294/1692/CM2296).

Warranty Coverage and Handling

A Mercedes-Benz CD Changer installed prior to or at retail delivery of a new Mercedes-Benz passenger car will be covered for the 48 months/50,000
mile term of the New Vehicle Limited Warranty.

The Warranty for a Mercedes-Benz CD Changer installed after retail delivery of the vehicle will be the remaining portion of the New Vehicle Limited
Warranty or the twelve (12) month Limited Service, Parts and Accessories Warranty, whichever is longer. See Limited Accessories Warranty for CD
Changer, (S-0417-C93) for complete details.

A CD Changer installed as an accessory after expiration of the New Vehicle Limited Warranty will be covered for the twelve (12) month term of the
Limited Service, Parts and Accessories Warranty.

All other terms and conditions of the New Vehicle Limited Warranty and Limited Service, Parts and Accessories Warranty will apply respectively.

The installation of a Mercedes-Benz CD Changer must be reported by the installing dealer through VISTA (new vehicles) or by using postcard form
S-2441-94B. For details, refer to Administrative Message no. 254 dated May 5, 1995 - filed in your Warranty Policy and Procedures Manual, section 9.

Note:

The transfer of a CD changer from one vehicle to another, voids the warranty.

Model 129

Group: 82

Number: 341

Date: October 1995

SUBJECT: 
MODEL 129 M.Y. 1996
INSTALLATION OF CD CHANGER

1.

Remove hardware from shipping box and verify contents.

2.

Remove shipping screws (2) from CD changer. Cover screws holes with dust covers (Fig. 1).

C/D Changer - Installation|Page 8201 > < Audio Control Relay|Locations