S 500 Sedan (140.051) V8-5.0L (119.980) (1996)
Fan Clutch: Service and Repair
Removal and Installation
-
Take off fan shroud ring (7) on fan shroud, place over fan, fit on.
-
Fit on counter-holder special tool No. 603 589 00 40 00 (01), remove.
-
Slacken bolt (1) with hexagon socket special tool No. 103 589 01 09 00, tighten with torque wrench special tool No. 001 589 72 21 00 to: 45 Nm.
-
Unscrew bolt (1) with key special tool No. 120 589 14 07 00, screw on.
-
Unbolt viscous fan clutch (3) from fan (2), bolt on.
Tighten to: 10 Nm.
CAUTION: The cast part number of the fan (2) must be positioned at the front (radiator side).