S 500 Sedan (140.051) V8-5.0L (119.980) (1996)
/v8-5.0l_(119.980)/Page-645003.png)
-
Moisten conrod nuts and thread and contact surface of conrod bolts with engine oil and tighten.
-
Tightening torque, refer to Tightening Connecting Rod Bolts. See: Connecting Rod/Service and Repair
CAUTION:
-
Pay attention to installation position of conrod bearings.
-
Install conrod bearing shell with oil drilling in the conrod otherwise lubrication of the piston pin is not assured.
13. Rotate crankshaft and check whether it rotates freely.
