S 500 Sedan (140.051) V8-5.0L (119.980) (1996)
/v8-5.0l_(119.980)/Page-654002.png)
-
Overlaps at the cylinder head cover gaskets at rear (arrows) must be correctly installed.
-
Replace gaskets which are kinked outwards or inwards at the side.
-
Install gaskets with identification 119 016 08 21 RA on right side and 119 016 07 21 LA on left side (identification in raised lettering).
-
Run engine and check for leaks, particularly at rear.
Bolt Diagram
-
Refer to bolt insertion diagram above.
-
Tighten bolts of cylinder head cover to: 9 Nm
