S 500 Sedan (140.051) V8-5.0L (119.980) (1996)
Blower Motor Resistor: Service and Repair
Front
Removing and Installing Blower Motor
Battery
Disconnect negative pole.
Air collector
Remove. See: Air Register/Service and Repair
Dust filter
Remove.
Electrical connectors
Disconnect.
4 screws (arrows)
Unscrew.
Blower
Take out.
Install
In the reverse sequence.
NOTE: The blower must not be dismantled, but must be replaced complete, i.e. blower with bracket and electronic blower controller.
NOTE: After completing the work erase fault memory in the control unit.