S 500 Sedan (140.051) V8-5.0L (119.980) (1996)
/v8-5.0l_(119.980)/Page-1592001.png)
Flex Plate: Specifications
Starter to Ring Gear Clearance Specifications
32
Starter To Ring Gear Clearance Specifications
Rear Edge Of Crankcase To Front Edge Of Ring Gear ........................................................................................................................... 14.3 to 15.2 mm
No. Of Shims Fitted ................................................................................................................................................................................................... 0
Rear Edge Of Crankcase To Front Edge Of Ring Gear ........................................................................................................................... 13.3 to 14.2 mm
No. Of Shims Fitted ................................................................................................................................................................................................... 1
Rear Edge Of Crankcase To Front Edge Of Ring Gear ........................................................................................................................... 12.3 to 13.2 mm
No. Of Shims Fitted ................................................................................................................................................................................................... 2
Dimensional Specifications
Permissible Variation:
Concentricity At Ring Gear ............................................................................................................................................................................ 0.30 mm
Centering Collar Diameter
For Driven Plate (1.5 mm Thick) ................................................................................................................................................. 296.00 - 296.05 mm
NOTE: Crankshaft bolts are microencapsulated, use only once.
