S 500 Sedan (140.051) V8-5.0L (119.980) (1996)
Transmission Mount: Service and Repair
-
Open hood, raise to vertical position.
-
Support transmission with a suitable device.
-
Detach cable straps of electric cable of kickdown at engine carrier (13), attach.
-
Remove engine carrier (13), install.
Tighten to:
M8: 25 Nm
M10: 40 Nm
-
Remove engine mount (11), install
Tighten to: 40 Nm.
NOTE: The installation position is fixed by a slot (arrow) on the engine mount (11) and by a recess (arrow) on the mounting plate (12).