S 550 (221.171) V8-5.5L (273.961) (2007)
11. Connect black 4-pin connector (19) of backup camera (B84/3) with black 4-pin coupling (24) of backup camera wiring harness (1) and pull
protective sleeve (26) over the backup camera connector.
12. Route line branch off (20) of backup camera (B84/3) as per picture into a loop and fasten to the vehicle's own wiring harnesses with cable ties (see
arrow).
13. Attach adhesive tape (17) to cover of the trunk lid release (15) with cutout for Backup camera.
14. Starting from the right clip in cover of trunk lid release (15) with clips (16) at the trunk lid (6) and press on adhesive tape (17) of the cover of the
trunk lid release (15) at the trunk lid (6)
15. Remove protective foil from lens of backup camera (B84/3).
16. Screw in the screws (13) on inside of trunk lid release (14).
17. Install trim of trunk lid (12).
18. Install hinge bracket trim piece (11).
19. Install cover (10).
20. Install holder (9) and insert hazard warning triangle (8).
21. Install umbrella holder (7).
22. Attach license plate to trunk lid (6).