S 550 (221.171) V8-5.5L (273.961) (2007)
/v8-5.5l_(273.961)/Page-4228010.png)
Shown on model 221
Wear cotton gloves. Ensure that no fingerprints (1, 2) are present in the area of the bonding surface. To prevent adhesion problems when installing the
window, keep the bonding surface free of dust, oil, grease, wax, dirt residues and other adhesive substances.
1. Cut down present glue beads (1, 2) on body flange to a height of approx. 1 to 2 mm.
Wet/dry vacuum cleaner.
Do not leave more than 2 mm of present adhesive bead (1, 2). Remove glue residues from glue beads (1, 2) not completely cut off.
2. Repair paint damage on body flange.
3. Apply primer in gluing area if glue residues are not present.
Observe drying time of at least 10 minutes.
AR77.21-P-7010-02SX Prepare Front Glass Cover Body Flange For Installation
AR77.21-P-7010-02SX Prepare Front Glass Cover Body Flange For Installation
Repair Materials
Shown on model 221
