S 550 (221.171) V8-5.5L (273.961) (2007)
Application of sealant to oil pan bottom section for engine with front sump
Application of sealant to oil pan bottom section for engine with front sump
The line (1) identifies the sealant run.
The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm
(±0.5 mm).
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only sealant listed in the Repair Products may be used.
Application of sealant to oil pan bottomsection for engine with middle sump
Application of sealant to oil pan bottom section for engine with middle sump