S 550 (221.171) V8-5.5L (273.961) (2007)
/v8-5.5l_(273.961)/Page-1127001.png)
Oil Pan: Removal and Replacement
AH01.45-P-0001-01SX Notes on Application of Sealant to Oil Pan
AH01.45-P-0001-01SX Notes on application of sealant to oil pan
Modification notes
Modification notes
Oil pan with front sump
Oil pan with front sump
The line (A) identifies the sealant run.
The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm
(± 0.5 mm).
The sealant must be applied within 10 min.
The sealant bead must not be spread. Only the approved sealing compound may be used.
