S 550 (221.171) V8-5.5L (273.961) (2007)
/v8-5.5l_(273.961)/Page-941006.png)
Component Identification
1
Detach retaining ring from wheel carrier (2).
2
Position wheel carrier (2), drift (01), pressure plate (03) and extraction/insertion sleeve (02) from extraction and insertion tool 140 589 08 43 00
on workshop press.
Use suitable horizontal base for support during pressing procedure.
3
Press out wheel bearing (1) by operating workshop press.
Press in angular contact ball bearing
Component Identification
