S 55 AMG (220.174) V8-5.5L SC (113.991) (2004)
to prevent leaks.
NOTE: Observe application of sealing compound to oil pan bottom section
-
See Information on application of sealant to oil pan.
16
Install in the reverse order
17
Read out fault memory with STAR DIAGNOSIS and erase if necessary.
18
Check engine oil level 2 minutes after switching off the engine at normal operating temperature, correct if required
19
Fill and bleed ABC system
-
Model 215, 220, 230
20
Pour oil into reservoirs of tandem pump, check oil level.
21
Inspect ATF level of automatic transmission, top up ATF if necessary
22
Run engine and inspect for leaks.
AH01.45-P-0001-01R Notes on Application of Sealant to Oil Pan
AH01.45-P-0001-01R Notes on application of sealant to oil pan
Component Identification
The line (F) indicates where the sealant is applied.
Clean sealing surface. The sealant should be applied only to the indicated surface in the form of a bead of height mm and width 2.0 0.5 mm. The
sealant must be applied within 10 min. The silicone bead should not be spread. Only the approved silicone sealant may be used.
Application of sealant to top part of oil pan