S 600 (140.057) V12-6.0L (120.982) (1998)
Grip (1) on wooden roller blind (2)
remove, whilst opening wooden roller blind and unscrewing the cross-head screws (2 pieces) on the underside of the blind (figure 2).
Insert in storage compartment
remove.
Cable for rear area nozzle (4)
unhook (figure 3).
Rear area nozzle (4)
unclip (arrows, figure 4) and remove rearwards together with the cable.
Wooden roller blind (2)
Close.
Roller blind tracks on rear left and right
open (arrows, figure 5).
Wooden roller blind (2)
withdraw rearwards from the opened roller blind tracks (figure 6).
Installation
install in opposite order. It is essential to close the two track openings after installing the wooden roller blind.