S 600 (140.057) V12-6.0L (120.982) (1998)
Sunroof / Moonroof Interior Trim Panel: Service and Repair
Steel Tilting/Sliding Roof
Removal and Installation:
-
Open tilting/sliding roof, unclip headliner with plastic wedge (Fig. 1), pull out toward top and completely close tilting/sliding roof.
-
Position slider (Fig. 2) horizontally and completely open tilting/sliding roof.
-
Reinstall in opposite order.
Installation Note: When installing insert tube into guide on head- liner (Fig. 3). Move tilting/sliding roof half way up and check to ensure that side
covers move in and out properly (Fig. 4).