S 600 (140.057) V12-6.0L (120.982) (1998)
2
The piston of cylinder 1 is in ignition TDC when the base circles of the righthand intake and exhaust camshaft at cylinder 1 are resting against the
bucket tappets (6).
Camshaft adjuster of intake camshafts against retard stop (mechanical stop in direction of rotation of camshaft).
The 4 mm holes (arrows) in the camshaft flanges are touching the top edge of the cylinder heads (arrows).
3
As a check, insert 4 mm diameter pins (111 589 03 15 00) into the holes (arrows) in the camshaft flanges at the left and right cylinder head.
4
Adjust basic setting (05-2240).
SPECIAL TOOLS