S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
Console: Removal and Replacement
AR68.20-P-2000M Remove/Install Center Console
AR68.20-P-2000M Remove/Install Center Console
1
Remove selector lever cover (8)
NOTE: Selector lever in position "D"
2
Open front stowage compartment cover (10) on stowage compartment in front of selector lever, unclip bottom of front stowage compartment (9)
and remove.
3
Unscrew screws (1)
4
Unscrew screw (2)
NOTE: Move driver and front passenger seat toward foremost position
5
Unclip upper cover (5) and remove
6.1 Unclip rear compartment nozzle cover (7) on upper rear compartment nozzle (6) toward rear with plastic wedge.
CAUTION: Do not use sharp tool to prevent damage to cover and center console!
-
See "Special Tools" below
6.2 Remove covering (7) with stowage compartment upward toward rear.
6.3 Remove button control unit for rear air conditioning system
7
Disconnect connector from rear compartment nozzle adjustment illumination
8
Remove rear compartment nozzle (6)
9
Disconnect connector from stowage compartment illumination.