S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
After an interruption to the power supply (terminal 30), the steering angle sensor must be re-initialized. This is done by turning the steering wheel
from lock to lock.
GF42.45-P-4600-03C Steering Angle Sensor, Position
GF42.45-P-4600-03C Steering angle sensor, position Models 211, 215, 220, 230, 240
GF42.45-P-4600-04A Steering Angle Sensor, Design
GF42.45-P-4600-04A Steering angle sensor, design
Component Identification
Body
Digital sensor with 9 light-emitting diodes (a) for photoelectric barrier measurement. The steering angle sensor consists of 2 microprocessors forming
a single unit together with one signal ring. The signal ring accommodates the 9 light-emitting diodes (a) at equal intervals. These are located in a
photoelectric barrier duct which is traversed by 8 blades (b) of various lengths. The photoelectric barriers are located in the upper part of the contact
spiral (A45) and the two components must be assembled (clipped together) to form the complete functional unit of the optical steering angle sensor
(N49).
GF42.45-P-4600A Steering Angle Sensor, Location/Task/Design/Function
GF42.45-P-4600A Steering angle sensor, location/task/design/function