S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
contact with fuel.
-
No fire, sparks, naked flames or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when
handling fuel.
1
If fuel tank is full, pump out about 8 liters of fuel
2
Remove trim panel in trunk
3
Remove rear panel of fuel tank
4
Unplug socket (arrow) for fuel gage sensor (B4) and pressure sensor (only (USA))
NOTE: Fuel gage sensor (B4) and pressure sensor form a single unit.
5
Open bayonet lock of fuel level gage sensor (B4)
Refer to Special Tool below
6
Take out fuel gage sensor (B4)
CAUTION: Installation: Replace gasket (89/2). Oil to facilitate installation.
7
Install in the reverse order
Special Tool