S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
Removing
1
Remove wheel carrier
Measuring
2
Place wheel earner for measurement with the wheel hub or brake disc on parallel supports
3
Measure and note height dimension "A" as a comparative measurement with the height marking device (025)
-
Measure at the flat surface of the brake caliper fixing (arrow)
4
Measure and note height dimension "B1-B4" at the lowest point of the respective bore
NOTE:
-
The test values are derived from the difference between height dimension "A" and height dimensions
-
"B1" = Torque strut fixing
-
"B2" = Camber strut fixing
-
"B3" = Track rod fixing
-
"B4" = Connecting rod fixing
Torsion bar
Installing
5
Install wheel carrier.