S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
Tire Pressure Module: Service and Repair
AR40.15-P-0100M Remove, Install Control Module Of Tire Pressure Monitoring System (TPM)
1
Read out variant coding of TPM [RDK] control module (N88)
NOTE:
-
To do this connect STAR DIAGNOSIS and transfer data of TPM [RDK] control module (N88) to STAR DIAGNOSIS
-
Installation: Transfer stored data to new TPM [RDK] control module (N88)
2
Move passenger seat into rearmost position.
3
Remove floor mat and lift back floor covering (1) in passenger footwell.
4
Remove impact absorber (2).
5
Unscrew plastic nuts (3) and remove step plate (4)
6
Unlock electrical connector (5) and unplug connector from TPM [RDK] control module (N88)
7
Unscrew bolt (6) and pull TPM [RDK] control module (N88) out of retaining clamp (7)
8
Install in the reverse order
9
Read out fault memory and erase if necessary
10
Activate the tire pressure monitoring system
-
Select settings on display system