S 600 (220.176) V12-5.5L Turbo (275.960) (2005)
Wiper Motor: Removal and Replacement
AR82.30-P-6800M Remove/Install Wiper Motor
Illustrated On Model 220
Removing
DANGER:
-
Injury hazard Windshield wiper mechanism can pinch, crush or, in extreme cases, even sever extremities.
-
Always remote ignition key when working on windshield wiper mechanism.
1
Open engine hood, raise to vertical position
2
Remove wiper system
3
Unscrew nut (1) from wiper motor shaft
4
Press crank arm (2) off with wiper linkage
5
Unclip connector on bracket (4)
6
Unscrew screws on wiper motor (3)
7
Remove wiper motor (M6/1)
Installing
8
Move wiper motor (M6/1) to parking position
9
Insert wiper motor (M6/1)
10
Screw in screws in wiper motor (3)
-
Screw on wiper motor mounting: 9 Nm
11
Clip connector on bracket (4)
12
Align crank arm (2) to upper rib of wiper motor mount at angle (A)
-
Dimension: Angle "A" between crank arm and rib: 74 degrees
13
Rotate nut on wiper motor shaft (1)
-
Nut on wiper motor shaft: 19 Nm
14
Install wiper system
15
Close engine hood
16
Check windshield wiper for proper functioning.