S 600 (221.176) V12-5.5L Turbo (275.953) (2007)
/v12-5.5l_turbo_(275.953)/Page-3328007.png)
4. Install left longitudinal member reinforcement (2) into crossmember (1) and fasten finger-tight using two bolts M12 x 1.5 x 35 (13).
The bolts M12 x 1.5 x 35 (13) may only be tightened to the specified torque after aligning the trailer hitch. The left longitudinal member
reinforcement (2) is marked by a sticker.
5. Push the seal (4) as per the picture, with the lug (9) to the right, onto the left longitudinal member reinforcement (2).
The lug (9) is identified by an arrow and "TOP".
6. Install right longitudinal member reinforcement (3) into crossmember (1) and fasten finger-tight using two bolts M12 x 1.5 x 35(13).
The bolts M12 x 1.5 x 35 (13) may only be tightened to the specified torque after aligning the trailer hitch. The left longitudinal member
reinforcement (3) is marked by a sticker.
7. Push the seal (4) as per the picture, with the lug (9) to the right, onto the left longitudinal member reinforcement (3).
The lug (9) is identified by an arrow and "TOP".