S 600 (221.176) V12-5.5L Turbo (275.953) (2007)
8. Insert the red fuse carrier from the trailer hitch wiring harness for fuse 145 (N10/2f145) in the fuse plug position 145 on the rear signal acquisition
and actuation module with fuse and relay module control unit (N10/2).
The fuse receptacle 145 is designated by "145" and color coded.
9. Insert the orange-colored fuse carrier from the trailer hitch wiring harness for fuse 146 (N10/2f146) in the fuse plug position 146 on the rear signal
acquisition and actuation module with fuse and relay module control unit (N10/2).
The fuse receptacle 146 is designated by "146" and color coded.
10. Open the lock (23) on the rear signal acquisition and actuation module with fuse and relay module control unit (N10/2)
11. Route the red/black line (rt/sw) from the brown fuse carrier for fuse 133 (N10/2f133) between the rear signal acquisition and actuation module
with fuse and relay module control unit (N10/2) and the bracket (see arrow).
12. Close the lock (23) again on the rear signal acquisition and actuation module with fuse and relay module control unit (N10/2)
13. Insert the brown fuse carrier from the trailer hitch wiring harness for fuse 133 (N10/2f133) in the fuse plug position 133 on the rear signal
acquisition and actuation module with fuse and relay module control unit (N10/2)
The fuse receptacle 133 is designated by "133" and color coded.