S 600 (221.176) V12-5.5L Turbo (275.953) (2007)
16.
Tape and route brown/green along existing harness (Arrows, Figure 11, 12, 13) and down to rear SAM.
17.
Remove rear SAM (refer to WIS: AR54.21-P-1258SX)
Note:
Ensure vehicle data is extracted before removing rear SAM.
18.
Insert brown/green wire connector pin into pin position 21 of connector K4 in the kit included rear SAM (Arrow, Figure 14).
19.
Install new rear SAM (AR54.21-P-1258SX).
20.
Perform initial programming and reinitialize using Star Diagnosis.
C
FUNCTION TESTING AND FINAL ASSEMBLY