S 600 Coupe (140.076) V12-6.0L (120.980) (1995)
Warm-up RPM Graph
Warm-up Control Function
The warm-up control is effective at all engine temperatures. After each start-up (accelerator pedal in idle position) the engine increases the idle
speed for approx 20 seconds. Between 20 °C (68 °F) and 30 °C (86 °F) the engine speed is 800 - 950 RPM.
Maximum Speed Function
The maximum vehicle speed is limited to 250 km/h (155 mph). If this speed is exceeded, the throttle closes slightly to restrict the air intake into the
manifold.
Diode Matrix Location (V2)
DIODE MATRIX SIGNAL
When additional consumers are turned on (e.g. A/C, heated seats, rear window defogger), an engagement signal is transmitted to the diode matrix
(V2) for RPM increase. This signal is passed on to the electronic accelerator control unit to increase the idle speed.
A/C engagement Control Function
When the A/C compressor is turned on, the throttle valve opening is increased before the A/C compressor engages. This keeps the engine idle
speed at a nearly constant RPM.