S 600 Coupe (140.076) V12-6.0L (120.980) (1995)
1
Draw off oil from reservoir
2
Disconnect feed line from reservoir
3
Remove add-on parts (e.g air intake hose, fan shroud, ignition, distributor, etc ) to expose power steering pump, depending on the engine vanant.
4
Remove poly V-belt
5
Detach belt pulley (41) on ZF power steering pumps
NOTE: The belt pulley is a shrink fit on LUK power steering pumps.
6
Unscrew high pressure stretch hose (30i) and return line (30f)
NOTE: Seal pipe connections with blind plugs.
7
Detach high-pressure stretch hose (27a) and suction line (27b) on tandem pump
-
Vehicles with level control
-
Seal pipe connections with blind plugs
8.1 Detach oil lines (27b, 30f) to oil cooler pipe.
8.2 Detach oil lines (27c, 27d)
9
Detach power steering pump (30)
NOTE: On models 129 and 140 with 8-cylinder engine, remove power steering pump with beam, then detach power steering pump or reservoir
from beam.
10
Install in reverse order
11
Fill and bleed power steering pump